Baby On A Budget Part II: Re-Cover

So like I've mentioned, we've been so lucky in getting hand me down and/or very low cost furniture for the baby's room.  However, not lucky enough that everything matches.  Over the last couple of weeks I tackled the project(s) that I was totally dreading.  Painting and re-covering a glider and ottoman that my mom gave us. 

So check out where these guys started:

And what we got to fix them up:

First of all, they started in our garage, so they were clearly nice and dusty. We wiped them down and painted the wood on both to match the changing table Dave's work friend so nicely handed down to us.  The paint was awesome, and only took one coat.  However if you'll check out all the nice slats and poles and other small areas to paint on the glider, I had to touch up several times.  I hated every second of painting that, I won't lie, but I do LOVE how it looked when it was done.

After the paint had dried on both for about 24 hours, we used a spray lacquer to cover both of them to protect the paint and add some shine.  This is not the same stuff we'll use to finish the crib, but that's a whole other story.

Once they were dried and set, we moved them up to the baby's room to work on recovering them.  I decided to tackle the ottoman first, since I could do that without monopolizing my mom's sewing machine.

I had purchased some batting at JoAnne's to fill in where the ottoman was sagging a bit in the middle.  I folded about 3 layers over and placed them on top.  Looks great, I know.

Then after playing around with different options for covering this for a good half an hour, I had Dave come in for a consultation.  Clearly his engineer brain had a better idea than mine in like 4 minutes.  I won't even bore you with the options I tried out, but we ended up cutting a big piece of batting (enough to cover the top and sides over the red) and tacked it down in the inside.  We just used small wood tacks and a hammer.  I would recommend a thicker tack than we used, because ours bent really easily.

 So, when the batting was all tacked in, it looked like this:

The hardest part for me was the corners.  I couldn't figure out how I wanted to secure them, but I ended up kind of folding them under and tacking them on the bottom, kind of like wrapping a present.  I then did the same step with the fabric I bought to cover them.  I found a BOLT, a whole BOLT of navy fabric for $5 at WalMart.  Awesome.  Even if I messed it up totally, not a huge financial loss there.

You can see the corners a bit more on the finished product:

Ta Da.  Now don't get me wrong, I fought with that stupid batting for a good hour or so.  I wanted to kill someone. These 3 pictures make it look much easier than it was, but also just goes to show, anyone can do it.

About a week later, when I recovered from the ottoman stress, I decided to get it over with and recover the glider cushions.  I used the same fabric so the two pieces would match, but I cannot take credit for literally any of the process beyond that.  I simply pinned the fabric (inside out) around the current cushions and cut the fabric out around the pins, leaving an inch or so for error.  Those bad boys I took to my mom's for her to work her magic on.  She sewed around the cushions, we turned the covers right side out, put them back on and stitched them up.  Again, sounds a BIT easier than it was.

BUT check it out now, much better:

And the both of them together:

And a wider shot of the only finished corner of the baby's room (you don't want to see the other side):

Def making progress!  Don't worry - that small table will get the dark brown treatment shortly.  As soon as I can think about painting anything else, now that we're mid-crib painting.  Again - a whole other story, that one.  It's a beast.

So it definitely took some time and elbow grease - but probably only about $40 for the both of them including paint, fabric and spray finish.  So, in other words, totally worth it.  I'm obviously just saying that now that I'm done.

Baby Yar better appreciate it's matching room.  I know.  Clearly babies think about that kind of thing.

More fun stuff coming soon!

Goldfish?

So today makes 18 weeks for Baby Yar.  Time just keeps flying!  We find out Monday if it’s a he or she Yar, and are very excited about that.  Clearly.

Baby Yar is starting to really move around in there.  I can’t feel any distinct punches or kicks yet but it does very much feel like there is a goldfish swimming around in my stomach at times.  Lots of random wavy feelings.  I started feeling those the day Bowen (our sweet little nephew) was born.  Clearly Baby Yar is excited to meet him!

He or she can hear, and see (light that is) – its eyes are still closed.  Today it’s about five and a half inches long (not including its legs, which will inevitably be super long) and weighs about 5 ounces.  Not quite fully baked yet!

We’ve made more progress on nursery furniture updating, and bought a car seat last weekend.  Yikes!  Very weird to see it sitting in our living room.  I’m very excited to start buying massive amounts of cute, tiny clothes once we find out the sex of the baby.  I’m sure our checking account is not as excited.

Stay tuned for the big gender reveal and some furniture updates coming soon!

How To: Put a duvet cover on without crawling inside of it.

This was a big problem for me back in the day.  I had a down comforter, with a duvet, that had a VERY small hole.  In order to get a non-clumpy finished product, you were supposed to stuff the comforter through the hole, crawl in, grab a corner and scoot towards the back end of the duvet, all while holding the comforter and not schrunching up both layers up all over the floor and/or bed. 

There HAS to be a better way, right?  There totally is.  I learned this when we got an awesome hand me down comforter from two of our good friends.  The first time I went to wash the duvet, I found these little clips on all four edges. 

I was very confused for a hot minute, but then I realized my friend Julie is the smartest person in the world.  She clearly used those clips to avoid the crawl and scootch moves I was using to put my duvet on.

Since we just got a new duvet cover for our bedroom, I figured I’d show you all this little trick.  To clarify, the new duvet cover was necessary due to the fact that we bought a black comforter before we bought our tan, crazily shedding dog.  In addition, I was over the dry cleaner people making fun of me when I dropped off the comforter, so I figured being able to simply wash a cover in the privacy of my own home would be much better.

So, I just lined up the comforter and duvet on the edge of the bed.  Duvet needs to be inside out!

Then clipped the overlapping edges with these lovely little clip guys and made sure it was pulled tight across and both the comforter and duvet cover were even.  

Then you simply pull the cover up around the comforter to the top.  Since this is the first duvet cover I have bought in like 10 years, they have gotten a little more technologically advanced.  The bottom has this lovely little pocket to place the edge in, so I really only needed two of the clips.

Then you just close up the cover, shake it out a few times while holding on to the clipped ends and you have a lovely, non-bunched up comforter.  

And also you’re not sweaty and frustrated from crawling around in a large cloth cotton death trap.

Win win for everyone!  Except Dexter.  I'm fairly certain he's mad that he will no longer be able to see his fur everywhere.

Baby on a Budget – Part 1. Work with what you’ve got and DIY.

We’re having a baby on a budget.

Not sure if you all have noticed, but having a baby can be incredibly expensive.  There are so many options out there when it comes to cribs, strollers, bedding, changing tables, bottle warmers, etc.  I could go on for days, but you get the idea.  Some of these big ticket items in particular are not very nice to one’s budget.  And, personally, I would rather drop a grand on some sort of tropical vacation with fruity drinks than on a stroller and car seat (no offense intended Baby Yar). 

This, my friends, is why my husband and I have been trying to come up with any and all ideas to get this baby here for a reasonable price.  And, because I love to share (and over share), I will pass what we come up with along to all of you, just in case there is anyone else out there attempting to still have a balance in their savings account after the birth of their child.

We started by thinking about the nursery, clearly an easy place to start.  Luckily, our extra bedroom is currently painted a very light brown, which is the color it will stay for multiple reasons.  One, to save money and time on repainting.  Two, we will probably put our house on the market within the next few years and didn’t want to create a unique nursery specific color palette and/or design that we would have to re-paint eventually for resale value.  Three, we may have more than one kid in that room at some point and brown is nice neutral color that goes easily with any other color.  Which conveniently leads me to my next point, go gender neutral.

Now, I never thought I would be a gender neutral person (pink or blue all the way!), but thanks to my loving, rational husband, I realized the actual genius behind this idea.  Now, I clearly am not the first or the only person to realize this, since there is currently a great market for gender neutral baby products.  But, for our situation it makes SO much sense, budget and space wise. 

So, because I felt the need to start working on the room immediately, I made a pin board of nurseries that I liked and shared them with Dave.  We both were leaning towards nurseries that used blues and greens, with some yellow and/or orange accents (what boy OR girl wouldn’t love those colors?).  So, then I made a trip to JoAnne Fabric (they will cut you an inch of fabric for free!) to grab a few samples of colors/patterns that I liked to run by Dave for male approval.

We narrowed down our color scheme and then I started browsing online to find other patterns that may work for curtains (my initial DIY project).  Curtains can be crazy expensive, and it can be hard to find exactly what you want.  So I thought hey, those can’t be too tough to throw together, let’s do that.  Luckily I was right. 

In my online browsing, I found several very cool fabric websites (Fabric Worm and Contemporary Cloth were two of my faves) both of which had great patterns at fairly reasonable prices.  But, in the end, I found the fabric we went with a good old JoAnne’s.  They were having a 40% off sale on all of their cotton fabrics, yay, and I found a great green/blue/yellow paisley pattern that I LOVED.  And hoped Dave would also.  So, I bought six yards (two separate 3 yard panels) for $19.50 total.  Awesome.

So this past Sunday, I spent 5 or so hours at my mom’s (who generously donated her ironing board, sewing machine, thread AND sewing expertise to help with the cause) making curtains.  It really was a fairly simple process.  I found a great tutorial here that I referenced before I went over, just so I had some idea of what I was doing.  We followed it pretty closely, but let me know if you have any questions!

We used the same curtain rod we had already up in the room - so when we finished I just had to hang them!    I think they look pretty good!

Stayed tuned for more DIY projects.  Painting baby furniture is next on the list!